Ctube Schedule 40 Electrical PVC Pipe Plastic Conduit for Cable Management

• Color: Grey
• IP Rating: IP67
• Application: Electrical Wire Cable Protection
• Material: PVC
• Certification: UL,CSA,
• Standard: UL 651
• Model NO.: CTSC4012
• Length: 10/20FT
• Resistance to UV: Sunlight
• Resistance to Bend: Rigid
• Flam Retardant: UL 94 V0 Rated
• Transport Package: Can Be Customized
• Specification: 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 3, 4, 5, 6, 8inch
• Trademark: Ctube
• Origin: Dongguan, China
• Production Capacity: 10000000 Meters/Week

Product Description

Ctube Schedule 40 Electrical Pvc Pipe Plastic Conduit  for Cable management

Ctube Schedule 40 & 80 PVC Conduit is designed for underground or aboveground applications, and it is backed by over 10 years of manufacturing excellence.

1.Nonmetallic PVC material which is corrosion, rust and sunlight resistant
2.UL listed
3.Standrd: UL651 and CSA
Comply with NEMA TC-2
4.Rated for use with 90-degree C conductors
5.Sunlight Resistant
6.10' Lengths
7.20' Lengths available (See note below)

FEATURES AND BENEFITS

Saves Labour
Rigid PVC Conduit pipe and ffttings are easy to install, cut and join.

 

Easy Wire Pulls
The conduit's smooth interior surface reduces friction and prevents damage to wires when pulling wire and conductors for long runs and even through 90° bends.

 

Lightweight Materials
Rigid PVC Conduit is easier to move and handle because it is approximately one-fffth the weight of steel and half the weight of aluminium.

 

Simplifies Direct Burial
Rigid PVC Conduit does not require additional protection for direct burial installations according to the Canadian Electrical Code (CEC) and the National Electrical Code (NEC). Normal construction practices should be followed for trenching and backffll operations.

 

Non-Conductive
Rigid PVC Conduit is non-conductive.

 

Long Life
Rigid PVC Conduit and ffttings resist acids, alkalis, salt solutions and most other chemicals. (Refer to the Chemical Resistance Guide for detailed information.) There is no risk of corrosion when exposed to naturally corrosive soil conditions, electrochemical or galvanic environments. Rigid PVC Conduit has achieved sunlight resistance as per the requirements of the Electrical Code.

UL Listed
Standard:UL 651,CSA C22.2 No.211.2 
PVC Material Test: ASTM D1784-20
Comply with NEMA TC-2
 

Smooth Surface
Smooth interior and outside surface, uniform wall thickness.
Protect the cables/wires for long runs.

UL94 V0 Fire Rating
The flame will be extinguished in 5 seconds after remove the open fire.

 

Properties

Tensile Strength	5000 psi (3.45 kN/cm2)
Extrusion	Fusion
Water Absorption	<0.50% of Whole Weight After Soak
Resistance to Crushing	ID≥70% After Test
Resistance to Impact	Less Than 3 of 1/32 inch Cracks &   Tears
Deflection under Load	<0.25mm Deformation
Fire Rating	UL 94V-0
Resistance to Specific Reagents	Less ±2.50% Weight After 60 / 120 Days Soak
Permanency of Printing	Yes
Rust & Sunlight Resistant	Yes
Color	Gery or Customized
Material	PVC
Customized Services	Available
Place of Origin	Dongguan, China
Shipping	By sea
Samples	Available
Length	10ft. or 20ft.

 

Markings

Information to be marked on conduits,

a) The phrase "rigid PVC conduit,

b) The trade size of the conduit product,

c) The name or trademark of the manufacturer or any other distinctive marking by means of which the organization responsible for the product can be readily identified

d) The date or other dating period of manufacture not exceeding any three consecutive months.
For an elbow the date of manufacture is to be the date that:

1) The conduit is extruded when both extrusion and bending occur at the same location or
2) The elbow was formed, where the conduit is extruded at a different location.

f) All markings shall be repeated at uniform intervals and shall appear at least every 10 feet (3 m), but not less than once, on each straight length of PVC conduit.

1.What is your MOQ ?

   Depend on your order (different kinds of items have different MOQ )

2. What is your delivery time ?

    Normally, the time of delivery duration is around 15 days

3. What is the shipping port ?

    We ship the goods via shenzhen port

4. What is your payment term ?

    We accept 30%T/T in advance, 70% in the period of shipment or 100%L/C

5. How should I contact you ?

    You can contact us with Trade Manager or send us an email

6. How about the samples ?

    Our samples are free . we could send you the sample, most samples are free to send to most place.